SOFT-TEC® COMMERCIAL / INDUSTRIAL WATER CONDITIONER SCALE CONTROL SYSTEM COMPONENTS MINERAL TANKS • Excalibur mineral tanks are made of high pressure composite materials - LLDPE liner with FRP filament winding outer shell • Thread inlets are made from 30% glass filled PP provides higher strength, temperature and pressure limits versus glass filled PE • This design provides excellent strength, durability and leak free service • Maximum operating pressure 125psi • Maximum operating temperature 120˚ F • Mineral tanks are NSF 44 & PED certified FLEXBED SCALE CONTROL OPTIMIZER • FlexBed beads float on the water and surrounds the upper basket which helps in uniform collection of conditioned water at top • Boost the performance of media in making crystals • FlexBed protects the upper basket • Increases turbulence in water which release carbon dioxide hence removes carbonic acid • Loading 4GPM flow per 1 liter FlexBed WATER DISTRIBUTION • Excalibur ABS segmented stack distributors are utilized to evenly distribute water flow at bottom and evenly collect the water flow at top RECIRCULATION SYSTEM • Recirculation pump makes the system handle wide flow range, flow rate will be determined by tank size • The recirculation pump’s suction is connected to outlet and discharge at the inlet of conditioner with inbuilt check valve • The plumbing of recirculation pump makes the conditioner to work efficiently even at low flow conditions. • Energy efficient circulator reduces the power consumption by 50% or more • Large display shows current energy consumption in watts • Large display shows estimated flow in gallons per minute SCALE CONTROL MEDIA • The Soft-Tec® salt free scale control media prevents the deposition of scale in pipes and heating/cooling systems • Water flows continuously through the Media in up-flow condition allowing catalytic media perform the scale control process while performing service without any use of sodium chloride (water softening salt) • Convert hardness particles to suspended crystals which are left with no electric charge and are unable to attach to plumbing and other systems • LSI > -0.0 • pH: 7.0 to 11.5 • Limitations: Iron, manganese, copper, phosphates and other foulants must not be present
RkJQdWJsaXNoZXIy NTc4ODc=